26
Configuring before HDR10 Signal Input
PF-IPEJ100F and PF-IPDJ100F Support HDR10 only if the HDMI Timing
Hybrid is set to “Pass-through” mode (default setting). Before you input
HDR10 video, ensure the source and all displays support HDR10, and follow
the steps below to configure the decoder through PF-PC Console.
1. Double click PF-IP Console.exe. Click
Search
to search online devices.
2. Click
Batch Commands
to open Batch Commands window:
Click
Video
Tab > Choose PF-IPDJ100F in the Devices list > Click
Pass-Through
from the drop down list in
HDMI Timing Hybrid
region >
click
Apply
.
Note:
The default setting for HDMI Timing Hybrid is
Pass-Through
.
3. Reboot the devices configured for the new settings to take effect.
Now you can play HDR10 video on your devices.
