10
No.
Name
Description
Off: PF-IPDJ100F is powered off or in the boot
process. / Network is down.
3
Mode
Use this switch to toggle between normal and debug
modes
.
Normal (Default): In this mode, you can connect the
rear panel RS232 port to a RS232 device such as a
computer for bi-directional serial communication
with a RS232 device on the IP control box side.
Debug: In this mode, you can connect the rear
panel RS232 port to a RS232 device such as a
computer for debugging PF-IPDJ100F.
4
DIP
This DIP switch consists of four manual switches, which
are used to route audio, video together with IR, and
USB signals between PF-IPEJ100F and PF-IPDJ100F
based on their positions. By default, each individual
switch is in the up position. For more information, see
"Using DIP Switch to Perform Routing".
Note:
For the DIP switches in both encoder and decoder,
changes to them take effect immediately without
rebooting the system.
5
USB Hub
Connect the two USB type A ports to a USB keyboard
and mouse. The connections are USB 2.0 compatible,
pro5 VDC at up to 500 mA to connected USB
peripherals.
Rear Panel
8
7
6
5
4
3
2
1
No.
Name
Description
1
DC 12V
Connect this port to a 12 V 1 A power adapter.
2
Reset
Use this button to reset device or quickly remove link
relationship between decoder and encoder.
Device reset:
When PF-IPDJ100F is powered on,
use a pointed stylus to hold down the Reset button
for five or more seconds, and then release it, it will
reboot and restore to its factory defaults. This
