20
Operating the Devices
Introduction to Different Operation Tools
You can use the front panel link DIP switch, PC configurator, PF-IP Touch and
IP control box to manage and control PF-IPEJ100F and PF-IPDJ100F
codecs. This section briefly introduces how to route the video from source to
the display using these tools. By default, audio, video together with IR, and
USB signals are routed as a whole. For more information, see their guides.
The following tables describes how audio, video together with IR, and USB
signals are routed using all the different tools.
Operation Tools Description
Link DIP switch
Route audio, video together with IR, and USB signals
as a whole.
PC configurator
PF-IP Touch
IP Control Box
Both of the following routing policies are available.
Route audio, video together with IR, and USB
signals as a whole.
Route audio, video together with IR, and USB
signals separately via IP controller's API
commands.
Note:
Operation tools PC configurator, PF-IP Touch and IP control box take
priority over the link DIP switch. Link relationship between encoder and
decoder performed by the DIP switch can be changed using any other
tools.
When audio, video together with IR, and USB signals are routed via PC
configurator, PF-IP Touch and IP control box, press and hold the rear
panel RESET button in decoder for less than five seconds to remove the
current link relationship between encoder and decoder, reverting to the
link relationship set by the link DIP switch.
When audio, video together with IR, and USB signals are routed
separately via IP control box's API commands, they can be routed as a
