Piusi cube mc, Руководство по эксплуатации и обслуживанию

Страница: 6 / 28

D2 TRANSPORT, HANDLING AND UNPACKING
1
3
7
2
0
4
55 290
1
1
8
1
9
6
293 52
314
500
CUBE MC is shipped inside stackable
cardboard packaging.
DIMENSIONS OF PACKAGING:
h=480 mm /
L=380 mm /
D=380 mm
TOTAL WEIGHT:
CUBE 70 MC = 26.5 kg
WEIGHT OF
PACKAGING:
1.8 kg
When the machine is not used, whether it is packed or unpacked, it must be stored in a place
protected from the weather (rain, damp, sun, etc.) and from dust. To remove the cardboard
packaging, use a pair of scissors or cutters, being careful not to damage the appliance. Fully open
the packaging and take out the CUBE MC so that it can be taken to the place of final installation.
Due to the weight of Cube MC, the product should be removed from its packaging by 2 persons.
Moreover, 2 persons should also attend to the positioning, fixing and installation phase. Once the
packaging has been removed, the station must always be kept in vertical position. Packaging parts
(cardboard, wood, cellophane, etc...) must be placed in specific containers and not left lying around
or within reach of children, as these represent a potential risk hazard. They must be disposed of
according to the regulations applicable in the country of use.Check the integrity of the machine
by making sure the shipped parts are not damaged in any way that could affect safety and
operation. In case of any doubts, do not start the appliance but contact the manufacturer's
after-sales service.
After unpacking, proceed to assemble the CUBE MC, as shown below:
- Fit the hose support hook (PHOTO No. 1)
- Fit the equaliser operating lever (PHOTO No. 2)
- Apply thread sealer at the points shown in the photo, before proceeding with final assembly.
(PHOTO No. 3)
PHOTO No. 1 PHOTO No. 2 PHOTO No. 3
EN
6
(Translated from Italian)