Piusi cube mc, Руководство по эксплуатации и обслуживанию

Страница: 18 / 28

DAILY USE L
L1 FUEL DISPENSING
Thanks to the MC control system, all the CUBE MC models provide access to authorised
users only.
MC acknowledges User authorisation by means of two alternative systems:
- The entering of a 4-figure SECRET CODE (PIN CODE).
- The fitting of an electronic key (OPTIONAL).
The configuration of the MC system permits requiring the User to enter further optional data
(vehicle licence plate, mileage, quantity to be dispensed).
See MC manual (M0103) for details.
If these options are not set, MC recognises an authorised PIN CODE and immediately enables
the pump to dispense fuel.
The pump will start (if previously enabled) just as soon as the control lever is moved to ON
position, while it switches off as soon as the control lever is moved to OFF position.
No further manual operation is required to start or stop the pump.
In the case of the simplest configuration (no optional data required), the fuel dispensing
procedure is the following:
1 Enter PIN CODE
If the MC recognises an authorised code, it displays the following messages and enables the pump.
EN
18
(Translated from Italian)
Fuel MUST ONLY be dispensed under the careful control of the User.
! ATTENTION
Such enabling does not result in immediate pump startup. The pump is in fact
controlled by a switch (positioned in the nozzle seat) operated by the user.
! ATTENTION
All the users to whom a PIN CODE is assigned must be adequately instructed and be
at least acquainted with the contents of this chapter.
! ATTENTION