9
Left & Right Touch Zones
Left & Right Touch Zones
The Touch Controller is split into 2 Touch Zones, Left and Right, each with 5 Touch Plates. The Touch
Zones allow the Touch Controller to always function as a pair of standalone touch interfaces. Each
Touch Zone has a dedicated set of outputs. GATE OUTPUT JACK(11,15), CV A OUTPUT
JACK(12,16), CV B OUTPUT JACK(13,17), Y-AXIS OUTPUT JACK(14,18). The Left and Right zone
outputs are always active in both Mono and Duo modes.
The GATE OUTPUT JACK(11,15) outputs a 6 volt, 13ms gate signal when a Touch Plate is pressed, a
sequence is advanced within the zone, or a change in the scan value is detected.
CV A OUTPUT JACK(12,16) outputs a voltage determined by the VOLTAGE PRESET KNOB A of the
active Touch Plate. The output range of the LEFT and RIGHT CV A OUTPUT JACK (12,16) is 0 to 5
volts.
CV B OUTPUT JACK(13,17) outputs a voltage determined by the VOLTAGE PRESET KNOB B of the
active Touch Plate. The output range of the LEFT and RIGHT CV B OUTPUT JACK (13,17) is 0 to 5
volts.
Y-AXIS OUTPUT JACK(14,18) outputs a voltage determined by the Y-axis touch location of the active
Touch Plate. The output range of the Y-AXIS OUTPUT JACK(14,18) is 0 to 5 volts.
5
6
7
1
2
3
4
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22
33
34
39
40
46
47
53
54
48
49
50
51
52
55
56
57
58
59
35
36
37
42
43
44
38
45
41
30
31
32
