6
Module Overview
The Touch Controller is an interface for interacting with gates and voltages. The module
features 10 Touch Plates, each with 2 assignable analog voltage presets, Y-Axis response,
gate response, multiple performance modes, and pattern sequencing.
The interface of the Touch Controller was designed to be intuitive with direct access to all of
the functions. The knobs on the Touch Controller set the analog voltage preset values for
the touch plates while the 3 buttons in the Channel Animator section manage performance
modes and sequencer settings.
Using the Touch Controller requires a basic understanding of both the user interface and
Controller Modes. The touch surface is split into 2 Touch Zones, Left and Right. Each Touch
Zone has 5 Touch Plates and a dedicated output section. The Left Output Section always
responds to the Left Touch Zone and the Right Output Section always responds to the Right
Touch Zone. The response of the All Output Section is determined by the active Controller
Mode.
