8
User Interface Information Section
(2 of 2)
Patch Points
The Touch Controller uses Eurorack standard 1/8” mono jacks for all the patch points. Input jacks have
an outline around their name. Output jacks do not. The Touch Controller interface does not distinguish
between audio, CV, and gate signals. In theory, any output can be patched into any input. In practice,
inputs respond best when patched to the expected signal type. However, experimentation can yield
surprising results. The type of signal input and output of each jack is covered in the corresponding
section.
Voltage Preset Knobs
The two rows of Voltage Preset Knobs set the CV A and CV B analog, unquantized output voltages for
the corresponding Touch Plate. The top row sets CV A and the bottom row sets CV B. The knobs are
calibrated to output between 0 volts and 5 volts. The maximum output voltage can be modified using
the calibration trim pots on the rear of the unit between anywhere between 0 volts and 9 volts.
Button Functionality
All the buttons have 2 functions. A main function clearly labeled below and a sub-function printed in
parentheses. To access the sub-function, press and hold down the button before pressing a Touch
Plate. The main function and sub-function of each button is covered in the Channel Animator section.
