manualshive.com logo in svg

Pitney Bowes EDGE 7.11, Справочное руководство, Страница: 511 / 896

Поделиться
Скачать
Pitney Bowes EDGE 7.11 Скачать руководство пользователя страница 511

Troubleshooting

PBX Gateway Problems

Telephony Gateway Reference Manual

511

PBX Gateway Problems

Agents Do Not 
Receive Calls, 
Calls Are In 
Queue

An agent is not receiving any calls but there are calls in ACD queues.
The following are possible reasons:

•

The agent has logged in with an incorrect workstation ID. To
correct this, have the agent log out and log back in using the
correct workstation ID.

•

The agent has logged in with an incorrect ACD group. To cor-
rect this, have the agent log out and log back in using the cor-
rect ACD group.

Agents Receive 
Calls Without 
VRU Data

An agent is receiving inbound calls, but the IVR data is not populated
in $TP.DATA. The following are possible reasons:

•

The VRU port for the call is not monitored by EDGE. The VRU
ports are specified in the telephony device file. Typically, the
ALERTING message does not appear in the data server log file
when this is the problem. To correct this, add the VRU port
number to the telephony device file and restart the tele-
phony servers.

•

The shared file for a Conversant VRU is not an Oracle file, or
the Oracle file is not available to EDGE. To correct this, ensure
the shared file is correctly defined in EDGE.

Содержание EDGE 7.11

































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов