manualshive.com logo in svg

Pitney Bowes EDGE 7.11, Справочное руководство, Страница: 455 / 896

Поделиться
Скачать
Pitney Bowes EDGE 7.11 Скачать руководство пользователя страница 455

Host-Based Routing

Setting Up Host-Based Routing

Telephony Gateway Reference Manual

455

ments to select agents or groups to receive the inbound calls using
criteria that meets business needs. 

To select a route destination for the host-based router task, fre-
quently the customer record is retrieved using the information pro-
vided by the switch. Alternatively, the call may be routed solely
based on the information provided by the switch. Depending on the
gateway and its configuration, the information provided to the host-
based router task may include the following (for definitions of these
items, see 

Appendix A, Glossary

):

•

Automatic Number Identification (ANI). 

•

Switch call ID.

•

Collected digits and shared file data if a Conversant VRU is
used.

•

DNIS.

•

II digits.

•

VDN. 

Copy the route destination desired into the system variable
$TP.HBRDEST to route the call. Be sure to specify a default route des-
tination if the host-based routing task criteria is not met. A call can be
routed to an agent extension, and ACD queue, or any other valid des-
tination such as an extension associated with an IVR.

Содержание EDGE 7.11

































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов