manualshive.com logo in svg

Pitney Bowes 9930, Руководство оператора

"Weider 9930" - это удобный и эффективный спортивный тренажер для домашнего использования. У нас вы можете бесплатно скачать руководство по эксплуатации "User Manual" на manualshive.com. Получите полное понимание работы тренажера и достигните желаемых результатов в фитнесе.

Поделиться
Скачать
background image

First, to stop a transmission, the COMMUNICATIONS STATUS Key must be
pressed to verify that the current transmission is the one that should be halted.
Then, following the prompts, the user presses the STOP Key (and then confirms
by pressing YES).  The transmission is halted and the interrupted document is
then deleted from memory, unless the 9930 is programmed to save stopped
transmissions.  (Call the Diagnostic Center if you wish to save the stopped
transmission in memory.)  The remote receiving machine is also notified that the
sender pressed the STOP Key.  If the 9930 is set to save stopped or incomplete
transmissions, incorrect jobs can be deleted or corrected (refer to Section 5.4 to
Edit Jobs).

The Pause key can be used also to temporarily interrupt a transmission.  By
pressing the Pause key while a transmission is in progress, the display will read,
"Pause Request."  "Paused" will show on the display once the transmission has
been paused.  During this time a priority transmission can be sent.  The paused
transmission will resume automatically after 5 minutes or if STOP is pressed.  

4.2.3 Automatic Daylight Time Shift (Not available in U.K.)
The automatic daylight/standard time shift is a newly added feature to the Pitney
Bowes Facsimile machines.  You will not have to be concerned with changing the
time on your unit.  The yearly time shifts will be consistent at least through the
year 2005.  It will occur on the first Sunday of April (one hour ahead) and the last
Sunday of October (one hour back).  This feature can be disabled by your Service
Representative or the National Diagnostic Center for states or countries that do
not comply.

4.2.4 Multiple Selectable Transmit IDs
The 9930 allows you to set up to 25 different Transmit IDs. A user's personal ID
can be chosen while setting up a document transmission.  The machine's default
ID is used if one is not selected.  The ID is used in the traditional "FROM" section
of the identification banner at the top of each transmitted page. It is also used in
the "FROM" box on the Automatic Cover Sheet (if this feature is activated).
Multiple IDs provides a personal touch to the Model 9930 if it is shared by
numerous users in an office or department.  See Section  5.7.1.

4.2.5 Remote Retrieval
This feature allows you to retrieve documents received into the 9930's memory
(except Mailboxes and pending jobs) from a remote fax. If turned on in the Set Up
Memory Function (see Section 5.9), all documents will be received into memory.
To retrieve them you must know the 9930's polling passcode (see Section 5.7.1,
Step #17, Setting Up the System).  The passcode is used for securing the remote
retrieval feature.  You must have Touch Toneô service.  Call your 9930 and
immediately after the receive tone stops; enter #**#XXXX* (XXXX is polling
passcode) from the keypad.  After the solid ready tone, press Send/Receive to
receive the documents from the 9930.  All documents in the 9930's memory will
be erased after being received by the remote facsimile.

27

Содержание 9930




























































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 9930

Baby Lock imagine Quick Reference Threading Manual preview
imagine
Бренд: Baby Lock Страницы: 2
Necta Astro Brochure And Installation Manual preview
Astro
Бренд: Necta Страницы: 13
JML easy STITCH Instructions And Guarantee preview
easy STITCH
Бренд: JML Страницы: 12
Fimap FS50 B Use And Maintenance Manual preview
FS50 B
Бренд: Fimap Страницы: 19
Tesco EJ09 User Manual preview
EJ09
Бренд: Tesco Страницы: 36
Vendo SVE DL6 Programming Manual preview
SVE DL6
Бренд: Vendo Страницы: 48
White Rotary 1202 User Manual preview
Rotary 1202
Бренд: White Страницы: 44
XPower F-16B Owner'S Manual preview
F-16B
Бренд: XPower Страницы: 12
Riccar 734DE Instruction Manual preview
734DE
Бренд: Riccar Страницы: 22
Castelle FaxPress Manual preview
FaxPress
Бренд: Castelle Страницы: 5
ACCO Brands GBC StreamPunch Ultra Operation & Instruction Manual preview
GBC StreamPunch Ultra
Бренд: ACCO Brands Страницы: 92
afx light FOG1500MULTI Instruction Manual preview
FOG1500MULTI
Бренд: afx light Страницы: 19
Viruserv VF Stratus User Manual preview
VF Stratus
Бренд: Viruserv Страницы: 6
Singer 400W21 List Of Parts preview
400W21
Бренд: Singer Страницы: 50
Minuteman R100H User Manual preview
R100H
Бренд: Minuteman Страницы: 20
Duerkopp Adler 559 Service Instructions Manual preview
559
Бренд: Duerkopp Adler Страницы: 77
JUKI DDL-5550N Instruction Manual preview
DDL-5550N
Бренд: JUKI Страницы: 48
Brother 885-V95 Operation Manual preview
885-V95
Бренд: Brother Страницы: 204

Бренды по названию

Популярные бренды

Загрузить еще бренды