Pitney Bowes 2030 Скачать руководство пользователя страница 49 | Manualshive

Страница: 49 / 169

Pitney Bowes 2030 Скачать руководство пользователя страница 49

44

2. If there is not enough available memory to receive the entire transmission,

the Model 2030 will receive until memory becomes full and then the
telephone connection will automatically disconnect. The Model 2030 will
then not be able to receive until the paper supply is replenished. If this
occurs frequently, you should consider upgrading Memory or paper cassette
options available from Pitney Bowes (see Section 3.7.2 for more information
on available Document Memory Card options). Should you feel that it is
necessary to upgrade the Memory of your Model 2030, please call your
Pitney Bowes Sales Representative to place an order for the appropriate
option.

4.5.3 Receiving Manually

If you wish to configure the Model 2030 in the Manual Receive Mode, this can be
done by selecting the SET UP SYSTEM Feature. This means that you will have
to answer all incoming calls because the Model 2030 will not be able to
automatically receive. Refer to Section 5.7.6 for the procedures to change Auto
Receive from ON (YES) to OFF (NO).

If you configure the Model 2030 to receive manually, this is how you would
receive a document:

Do This

This Happens

1. A phone call has come in to the Model 2030. Lift the

Telephone Handset.

If you hear another person, it is a voice call and you
can continue your conversation as you would on a
normal telephone. Or, it may be a voice call after
which the caller wants to send you a fax.

If the call is from a facsimile unit, you will hear a
Send Tone.

Whether the call is a voice or
fax call, while the Telephone
Handset is off hook, the
display will read:

2. If you

hear a Send Tone when you lift the Telephone

Handset or you wish to receive a fax after a con-
versation, remove any document currently in the
Automatic Document Feeder and press the SEND/
RECEIVE key*. This will send a Ready Tone to the
other fax/phone. Then hang up the Telephone
Handset.

*Note: While printing pages or documents from
memory, you will not be able to press the
SEND/RECEIVE key until the Model 2030 has
finished printing all pages.

Voice connection is broken.

The other fax machine begins
sending the document and
your 2030 will begin to receive.

The following message ap-
pears in the display (if from
another 33,600 bps unit):

AUG 10 2001 10:00

PHONE OFF HOOK

RCV ULTRA FAST 33,600

(IDENTIFICATION)

«
...
47
48
49
50
51
...
»

Содержание 2030










































































































































































Отзывы:

Нет отзывов