6. INSTALLING THE LP TANK BARRIER BAR
Parts Required:
1 x LP Tank Barrier Bar (O)
2 x Screw (AA)
Installation:
• Attach the LP tank barrier bar (O) diagonally to the cart back panel (I)
and the cart base (W) using 1 screw (AA) at each end.
NOTE: The threaded end of the LP tank barrier bar should point to
the cart back panel, fastening from the outside of the cart.
7. SECURING THE CART SUPPORT BEAM
Parts Required:
1 x Cart Support Beam (X)
4 x Screw (CC)
Installation:
• Attach the cart support beam (X) to the left and right side cart panels
(P and B1) using 4 screws (CC).
NOTE: The magnets on the cart support beam (X) should be facing
outward, and the holes should face downward while assembling.
8. INSTALLING THE CART SUPPORT BRACKETS
Parts Required:
1 x Cart Support Brackets (U)
4 x Screw (AA)
Installation:
• Attach the cart support brackets (U) to the corners of the cart support
beam (X) and each side cart panels (P and B1) using 4 screws (AA).
9. MOUNTING THE CART HEAT SHIELD
Parts Required:
1 x Cart Heat Shield (T)
4 x Screw (AA)
Installation:
• Attach the cart heat shield (T) to the cart back panel (I) using 2 screws
(AA). Ensure the heat shield installs
under
the lip of the cart back
panel (I) as shown in illustration.
• Next, attach the cart heat shield (T) to the cart support beam (X) using
2 screws (AA). Ensure the cart heat shield (T) installs
on top
of the lip
of the cart support beam (X).
9
6
7
8
9
Содержание 75204
Страница 2: ......
Страница 6: ...6 UNPACKING THE GRILL ...
Страница 24: ...24 REPLACEMENT PARTS ...