Pit Boss 75204, Инструкции и руководство пользователя

Страница: 17 / 28

17
7. Observe that the burner has ignited. Remove the match and extinguish.
8. Repeat steps 2-6 for the next burner.
CAUTION: Do not cover the grids during the preheating period.
WARNING: Never leave a grill unattended to guard against possible grease fires getting out of control. Grease fires
can be severe and cause grill damage, property damage and bodily harm.
REPLACING THE BATTERY
Unscrew the electrical ignition button and remove the old battery. Replace with new AA battery.
Note: The negative (-) side of the battery goes in first. Please refer to the mark on the side of the cap.
LID POSITIONING – OPEN OR CLOSE
Cooking with the lid open or closed is a matter of personal preference.
• LID OPEN
Cooking with the lid-open is recommended if you enjoy cooking at maximum searing temperatures. This method will also
produce more flare-ups, speed the cooking procedure and will give you a more robust, smoky, outdoor flavor. Lid-open when
grilling meats, especially chicken.
•
LID CLOSED
If you prefer cooking slower with less flare-up, we suggest the lid-closed method. Perfect for indirect or rotisserie cooking.
We recommend always cooking with the lid CLOSED if you are in a windy area or colder climate.
Your grill has been designed and constructed to give you maximum flexibility and cooking performance. Be creative. Try different
cooking methods on your grill to determine which suits your needs best. There is no right or wrong way to cook, just alternative
cooking styles. Get creative and enjoy!
CAUTION: Always protect your hand with a pot mitten or cooking glove when coming into contact with a hot surface.
CHECKING FOR GAS LEAKS
Before operating your grill, after refueling, check carefully to be certain that all connections are tight and there are no gas leaks.
1. Make 2-3 ounces of leak solution by mixing liquid dish-washing soap with water.
2. Make certain all control knobs are in the “OFF” position.
3. Brush small amounts of leak solution on all the fittings and turn the gas on.
4. If bubbles appear, there is a leak. Proceed to step 5.
5. Turn the gas off and tighten all connections.
6. Go back to step 1 to retest the fittings.
7. If bubbles continue to appear, turn the gas off. Contact Customer Service.
WARNING: Never use a match or open flame for leak detection. Use of an open flame could result in fire, explosion and
bodily harm.
IMPORTANT: When connecting or replacing any gas pipe or fittings, all joints must be sealed with approved leak-proof
sealing compound or plumber’s tape.