LIMITED WARRANTY:
pIpER pRoDucTs warrants to the original purchaser parts and
labor for a period of twelve (12) months from the date of purchase. see manufacturer’s complete
warranty for details.
It is our policy to build equipment which is design certified by companies that have been
accredited at the Federal Level by the occupational safety and Health Agency (osHA) and
ANsI as a National Recognized Testing Laboratory. These companies include csA International,
underwriters Laboratories, and the National sanitation Foundation. However, a continuing
program of product improvement makes it necessary to submit new models to the agencies as
they are developed. consequently, all models may not bear the appropriate labels at all times.
We reserve the right to change specifications and product design without notice. such revisions
do not entitle buyer to corresponding changes, improvements, additions or replacements for
previously purchased equipment. Information is not for design purposes.
SPEC
D I S P E N S E R S
D I S P E N S E R S
E L I T E 5 0 0
E L I T E 5 0 0
STEAM TABLES
STEAM TABLES
SUPPORT EQUIPMENT
SUPPORT EQUIPMENT
D R O P - I N S
D R O P - I N S
JOB__________ ITEM # __________ QTY # __________
MODEL NUMBER
300 S. 84th Avenue
Wausau, WI 54401
Phone: 800-544-3057
Fax: 715-842-3125
www.piperonline.net
F-3
2AT6-STH-XH
High Heat Mobile Plate &
Platter Dispensers
2AT6-STH-XH
R
R
2AT7-STH-XH
R
R
3AT6-STH-XH
R
R
3AT7-STH-XH
R
R
CABINET STYLE, MOBILE, ADJUSTABLE,
HIgH HEAT SERIES AT-STH-XH (PLATES)
SERIES ATO-STH-XH (PLATTERS)
SERIES AT(O)-STH-XH are heated, cabinet style, mobile
plate or platter dispensers. They are fitted with a high
wattage, forced air heating system for use when plates or
platters need to be brought to a higher temperature than
usual.
FRAME AND BODY
The body and top are of unibody design, constructed of
heavy gauge stainless steel panels formed to provide
rigidity. The unit is insulated on sides and top and lined
with zinc coated steel panels.
DISPENSERS
The unit is fitted with adjustable drop-in dish dispensers,
model AT for round plates (see catalog page D-9 for
specifications). Refer to the chart below for the dispenser
sizes available with these units.
CAPACITIES
The capacity of each model AT dispenser is approximately 28
to 36 bowls or 50 to 72 plates. The capacity of each model
ATO dispenser is approximately 50 to 72 platters.
HEATINg SYSTEM
The unit is heated by a forced air heating system designed
for rapid and even heating. A recessed control panel is fitted
with an on-off switch, a neon pilot light and an adjustable
thermostat. The system is rated 120 volt, single phase, 1500
Watts; and draws 12.5 Amps. A 4' long, three wire cord set
with NEMA 5-15P plug is included.
CASTERS
The unit is mounted on four 4" diameter heavy duty, double
ball bearing swivel casters.
DIMENSIONS (ROUND DISHES)
MODEL NO.
PLATE DIA.
W
L
H
2AT6-STH-XH
8-3/8" - 9-1/4"
20-1/8
35-1/8
36
2AT7-STH-XH
9-3/8" - 10-1/4"
20-1/8
35-1/8
36
Shipping Wt. 180#
MODEL NO.
PLATE DIA.
W
L
H
3AT6-STH-XH 8-3/8" - 9-1/4"
31-3/8
33-1/8
36
3AT7-STH-XH 9-3/8" - 10-1/4"
31-3/8
33-1/8
36
Shipping Wt. 230#
OPTIONS
Part #
Description
PB
Perimeter bumper
B
Corner bumper
V
Vertical corner bumpers
Y4
Polyurethane 4" casters, set of 4, with ball bearing seals
Y5
Polyurethane 5" casters, set of 4, with ball bearing seals
WB
Wheel Brakes (set of 2)
35-1/8”
20-1/8”
31-3/8”
33-1/8”
MODEL 2AT-STH-XH
MODEL 3AT-STH-XH
NOTE:
Overall height including dish guides is 40".
3AT6-STH-XH
Shown with optional
wrap-around bumper
157
