D I S P E N S E R S
D I S P E N S E R S
E L I T E 5 0 0
E L I T E 5 0 0
STEAM TABLES
STEAM TABLES
SUPPORT EQUIPMENT
SUPPORT EQUIPMENT
D R O P - I N S
D R O P - I N S
JOB__________ ITEM # __________ QTY # __________
SPEC
MODEL NUMBER
300 S. 84th Avenue
Wausau, WI 54401
Phone: 800-544-3057
Fax: 715-842-3125
www.piperonline.net
MTRS-10
R
R
MTRS-20
R
R
MTRS-72-6
R
R
F-5
FOR COMPARTMENTED TRAYS,
FOOD PANS OR SHEET PANS
Piper's Model MTRS Rethermalization Cabinet
incorporates a powerful convection type heating system
for fast and efficient rethermalization of refrigerated food.
A sophisticated solid state control system offers easy
setting of six programs, along with accurate temperature
control and precise repeatability.
CONSTRUCTION
The body is constructed of fully welded 18 ga. stainless
steel on both interior and exterior. It is mounted on a
rust resistant steel base designed for rigidity and impact
resistance. The base is mounted on 6” casters and
provided with corner bumpers on Model MTRS 20 only. 6”
high stainless steel adjustable legs are optional in place
of casters and bumpers. The cabinet is fully insulated
with 2” minimum thickness high density insulation. The
entire cabinet is easily cleaned and the inside can be
pressure washed (up to 114 psi). The cabinet is designed
with all electrical, electronic and air moving equipment
mounted in the top for easy maintenance. Removal of the
top lid enables access to all components.
The cabinet is available in two configurations: (1) Fully
self-contained with integral guides; or (2) Modular with
removable insert rack.
SELF-CONTAINED WITH INTEgRAL gUIDES
The cabinet is equipped with angle slides for pans. The
slides are made of 16 ga. stainless steel and are welded
to the interior cabinet walls. The cabinet is sized to hold
either (2) 12" x 20” x 2-1/2", deep pans per level or (1) 18"
x 26" sheet pan per level. Two sizes are available: Model
MTRS-20 with ten levels or Model MTRS-10 with five
levels (see chart below).
MODULAR WITH REMOVABLE INSERT RACK
The Model MTRS-72-6 cabinet is open, without guides, so as
to accommodate one removable insert rack. One insert rack is
provided with each cabinet. The insert rack is all welded with
(4) 2" dia. heavy duty heat resistant rigid casters. The frame is
.105 stainless steel; the guides are 16 ga. stainless steel. The
insert rack is sized to hold a total of (72) compartmented hot
food trays. A latch is provided to keep the insert rack in place
within the cabinet. A self storing latching ramp is provided to
allow easy transfer of the insert rack to a separate transport
cart. Additional transport and storage carts are available as
part of this modular system (see chart below). Selection of
hot food tray (not included with system) needs to be specified
to verify fit.
DOOR
The double pan door is constructed of fully welded 18 ga
stainless steel, insulated with 1-1/2" thick high density
insulation and fitted with a replaceable high temperature
silicone gasket. It is mounted on heavy duty hinges that
provide 270º rotation, with door stops provided to hold it
in the fully open position. A heavy duty edge mounted door
latch is provided, with provision for padlocking available.
HEATINg SYSTEM & CONTROLS
Models MTRS-20 and MTRS-72-6 are heated by a 15 KW
heater combined with a high capacity convection fan and
electronically controlled through a temperature range of 200ºF
to 350ºF. The model MTRS-10 cabinet is heated by a 9 KW
heater. See chart below for available electrical configurations.
All controls are mounted on the front of the cabinet, left
of center, and are protected against tampering or damage.
Programming functions can be restricted. Touch-pad type
buttons offer easy programming for various meals, with
the capacity to store six programs in memory. The operator
needs only to select the program in order to start the cycle.
The controller is programmed (standard) to rapidly heat the
cabinet, then maintain the set-point temperature within
2ºF. Its functions also include a pulsing mode and a holding
mode, each of which can be programmed by the user.
PC CONNECTION (OPTIONAL)
The connection can be used with a PC running Windows
95/98 or NT. A complete operation, programming and data
download can be done from the PC for up to 32 cabinets.
Rethermalization Cabinet
MTRS-20
MTRS-72-6
162
