TABLE III-I. INSPECTION REPORT (cont.)
Nature of Inspection
47. Inspect battery box and cables (inspect at least every 30 days. Flush box as
required and fill battery per instructions on box) (See Note 16)...........................
48. Inspect fire wall seals. ..........................................................................................
49. Inspect condition and tension of alternator drive belt. (refer to Section XI of
Service Manual)....................................................................................................
50. Alternator pulley remove front grease seal and add grease (refer to lubrication
51. Inspect condition of alternator and starter.............................................................
52. Inspect security of alternator mounting ................................................................
53. Check fluid in brake reservoir (fill as required)....................................................
54. Inspect and lubricate controls per lubrication chart (refer to latest revision of
55. Complete overhaul of engine or replace with factory rebuilt (See Note 5)..........
56. Install engine cowl ................................................................................................
C. CABIN GROUP
1. Inspect cabin entrance door and windows for damage, operation and
security. ................................................................................................................
2. Inspect upholstery for tears. .................................................................................
3. Inspect seats and seat belts for security of brackets and bolts. ............................
4. Inspect trim control operation. .............................................................................
5. Inspect rudder pedals for operation and adjustment. ...........................................
6. Inspect parking brake and brake handle for operation and cylinder leaks............
7. Inspect control column, pulleys and cables. .........................................................
8. Check landing, navigation, cabin and instrument lights. .....................................
9. Inspect instruments, lines and attachments. (see latest revision of Piper Service
10. Inspect gyro operated instruments and electric turn and bank (overhaul or
replace as required). .............................................................................................
11. Replace filters on gyro horizon and directional gyro............................................
12. Replace central air filter. ......................................................................................
13. Clean or replace vacuum regulator filter. .............................................................
14. Inspect altimeter (calibrate altimeter system in accordance with FAR 91.170, if
appropriate). .........................................................................................................
15. Inspect operation of fuel selector valve. ..............................................................
16. Inspect condition of heater controls and ducts. ....................................................
17. Inspect condition and operation of air vents. .......................................................
18. Inspect flap control cable attachment bolts, replace if worn. (Refer to latest
r e v ision of Piper Service Bulletin 965).................................................................
50
100 500 1000
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Inspection time (hrs)
PIPER AIRCRAFT
PA-28-161 CADET
AIRPLANE MAINTENANCE M A N U A L
Interim Revision: February 28, 1995
INSPECTION
1D20