Piper Aircraft Corporation PA-28-161 CADET, Руководство по обслуживанию

Страница: 53 / 422

Figure 2-11. Lubrication Chart (Control System) (Cont.)
1
2
3
4
5
6
10
8
9
10
11
1776
SKETCH A
7
5
A
COMPONENT LUBRICANT FREQUENCY
1. AILERON HINGE PINS MIL-L-78701 100 HRS
2. FLAP HINGE BEARINGS MIL-L-7870 100 HRS
3. STABILATOR HINGE PINS MIL-L-7870 100 HRS
4. RUDDER HINGE BEARINGS MIL-L-7870 100 HRS
5. CONTROL CABLE PULLEYS MIL-L-7870 100 HRS
6. TRIM CONTROL WHEEL MIL-L-7870 100 HRS
7. O-RING, CONTROL SHAFT BUSHING PARKER O-RING 2
LUBRICANT
AS REQUIRED
8. TEE BAR PIVOT POINT MIL-L-7870 100 HRS
9. CONTROL COLUMN CHAIN MIL-L-7870 500 HRS
10. CONTROL COLUMN FLEX JOINTS AND MIL-L-7870 100 HRS
SPROCKET
11. STABILATOR CONTROL MIL-L-7870 100 HRS
SPECIAL INSTRUCTIONS
1. Aileron hinges with teflon sleeves should not be lubricated. Aileron hinges without teflon sleeves should
first be cleaned with a dry type solvent then lubricated with MIL-L-7870.
2. Disassemble O-ring retainer plates from instrument panel; lubricate O-ring and reassemble
PIPER AIRCRAFT
PA-28-161 CADET
AIRPLANE MAINTENANCE MANUAL
Issued: FEBRUARY 28, 1989 HANDLING AND SERV I C I N G
1C5