Pioneer PRV-LX10 Скачать руководство пользователя страница 167

Страница: 167 / 194

PRV-LX10

167

How to replace the fan in the ATX Power Supply unit

Hook the slots.

Close.

Remove the switch-barrier fixing screw on the
ATX Power Supply unit (DXF1005) then slide
the switch barrier, as indicated in the figure.

Connect the harness to the fan connector and
install the fan into the panel. Push the harness
inside.

Attach the fan guard.

Slide the switch barrier and tighten the screw.

Remove the fan guard, then remove the fan and
disconnect the harness from the fan connector.

ATX Power Supply Unit
(DXF1005)

Switch barrier

Switch-barrier fixing screw

Fan connector

Remove the fan.

Note:

Be sure to set the POWER switch to OFF and
disconnect the AC power cord from the AC outlet
before starting this step.

Notes:

• Place the fan so that the name plate of the fan can be

seen from the front.

• Use the Fan Unit (DZM1001) dedicated to the ATX

Power Supply unit (DXF1005).

Push the harness inside so
that it will not come out.

Name plate can be seen.

1. Slide

2. Tighten the screw.

Removing the fan

Attaching the fan

Fan Cleaning
Cleaning paper : GED-008

Содержание PRV-LX10



































































































































































































Результаты поиска

Содержание PRV-LX10

Отзывы:

Бренды по названию

Популярные бренды

Pioneer PRV-LX10, Руководство по обслуживанию

Результаты поиска

Содержание PRV-LX10

Отзывы:

Бренды по названию

Популярные бренды