Pioneer PDP-42MXE10 Скачать руководство пользователя страница 49

Страница: 49 / 188

Handling the Standard Mounting Components

4.2 Handling the Standard Mounting Components

4.2.1 Handling precautions

This section of the manual discusses ways to mount, install, and handle the mounting hardware exclusively designed

for our plasma displays. Mounting should be performed by qualified experts.

Refer all installation and mounting work to qualified persons, or request assistance from a Pioneer dealer.

4.2.2 Precautions for installation contractors

1) Before installation

Observe the specifications supplied in “3.1 Installation Site Requirements”.

2) During Installation

Carefully read and observe the contents of this section of the manual.

The installation work should be performed by two or more people.

3) After installation

After installation the mounting hardware, check for adequate strength and properly tightened screws. Repeat this

inspection after mounting the display.

4) Delivering to the customer

(1)Explaining mounting precautions

We ask that the mounting contractor explain the following precautions to the customer after mounting and

installation work is completed. Even if the particulars of an installation are letter-perfect, your work may be perceived

as inadequate unless you patiently and thoroughly explain these precautions so that the customer fully understands

them.

The following are highly dangerous and must be avoided at all times:

• Any sudden application of force, including pushing and pulling

• Splashing water on the unit

• Placing any object on the unit

• Touching mount screws and other mounting hardware

For worry-free use of the unit:

• If any problem arises, the user should immediately ask the installation contractor to conduct inspection and

repair.

• To guard against accidents, ask the customer not to make any tilt or height adjustments. Such work should be

referred to the installation contractor.

(2)Mounting contractor contact form

We ask the mounting and installation contractor to complete the contractor contact form supplied with the unit

and give it to the end-user after post-installation inspections are complete and the above precautions have been

explained.

(3)Periodic inspections

Over time, aging of various components of the suspension/mounting hardware that are not readily visible may

render the installation unreliable. This may possibly lead to the display breaking free of its mounting. Please

recommend periodic inspections.

Содержание PDP-42MXE10





























































































































































































Результаты поиска

Содержание PDP-42MXE10

Отзывы:

Похожие инструкции для PDP-42MXE10

Бренды по названию

Популярные бренды

Pioneer PDP-42MXE10, Техническое руководство

Результаты поиска

Содержание PDP-42MXE10

Отзывы:

Похожие инструкции для PDP-42MXE10

Бренды по названию

Популярные бренды