Pioneer PDP-42MXE10, Техническое руководство

Страница: 122 / 188

122
Menu Mode
10) Color Decoding Setting
★
(Applicable only when a PDA-503/PDA-5004 is mounted.)
When a video signal is input at INPUT1, INPUT2 and INPUT5, it corresponds to an RGB and component video signal,
so this setting must be set in accordance to the connected device.
The setting should be performed as shown below for both INPUT1, INPUT2 and INPUT5.
(Example)
• When reproducing an RGB signal: Set to ‘COLOR DECODING: RGB’.
• For reproduction from a DVD player: Set to ‘COLOR DECODING: COMPONENT1’.
Settable condition: INPUT1, INPUT2, INPUT5
When a video signal (signal other than a PC signal) is input
Factory setting: For 525i, 525p, 625i, 625p signal input: COMPONENT1
For 750p, 1125i, 1125p, 1250p signal input: COMPONENT2
1
Select ‘SETUP’.
2
Place the cursor over ‘COLOR DECODING’ and press the
[SET] button to change the setting.
Each time the [SET] button is pressed, the setting changes
as shown below.
Set ‘COLOR DECODING‘ as follows.
Please take care when making settings. Incorrect settings
can adversely affect the Plasma Display.
M E N U I N P U T 1
CHANGE SET EXIT MENU
S C R E E N S E T U P O P T I O N
: D I S A B L E
: M I D D L E
C O L O R T E M P. : M I D D L E
A U T O P O W E R O F F
D N R
: L O W
: O N M P E G N R
C T I
: O F F
: R G B
P U R E C I N E M A
C O L O R D E C O D I N G
: A U T O C O L O R S Y S T E M
S I G N A L F O R M AT
P I C T U R E
Screen
2
3
RGB
COMPONENT2
2
3
COMPONENT1
Component video output
of a DVD player, etc.
Component video output
of digital tuner, etc.
RGB video output of a
video deck etc., with RGB
output
DVI video output of an AV
component with DVI
output port
RGB video output of a PC
Connected
component
COLOR DECODING
SETUP
COMP.1
COMP.2
RGB
RGB
Not supported