Pioneer PDP-42MXE10, Техническое руководство

Страница: 152 / 188

152
Integrator Mode
13) Assigning an ID
It assigns the ID necessary to adjust only the designated display on the video wall or to make an adjustment by RS-
232C adjustment. For details see “5.5 RS-232C Adjustment (pg. 172)”.
Factory setting: ALL
1
Enter the integrator mode.
(Refer to section 5.4.1, “About the Integrator Mode (pg. 134)”.)
Select ‘OPTION’.
2
Place the cursor on ‘ID NO. SET’, and press the [SET]
button.
3
Press the [
2
/
3
] buttons to change the settings.
Each time the [
2
/
3
] buttons are pressed, the setting
changes as shown below.
ALL ............... ID number cannot be set. It can be operated
from all remote controls.
OIH to FFH ... The ID number is set to the designated
number. It is possible to adjust displays
with a number that matches the ID number
that is displayed when the ID NO. SET on
the remote control is pressed.
Pressing the [SET] button will return to screen
2
.
The ‘ID NO. SET’ settings are common for all inputs.
I N T E G R AT O R I N P U T 1
ENTER
S C R E E N S E T U P O P T I O N P I C T U R E
SET EXIT MENU
P R O G R A M T I M E R
S C R E E N M A S K
S I D E M A S K
V I D E O WA L L
B A U D R A T E
I D N O . S E T
:
:
:
G R E E N
1
1 2 0 0 B P S
Screen
2
I D N O . S E T
:
SET
SET EXIT
MENU
1
Screen
3
3
ALL
2 3
OIH to FFH
2