92
Playback
HDMI
HDMI Out:
Select the HDMI OUT jack to output video signals from "MAIN",
"SUB", and "MAIN+SUB".
Sound Delay:
If the video is behind the audio, you can delay the audio to offset
the gap. Different settings can be set for each input selector.
•
It cannot be set if the listening mode is Pure Direct and the input signal is
either analog or DSD.
Audio Return Channel:
You can enjoy the sound of the HDMI-connected ARC-
compatible TV through the speakers connected to the unit. Select "On" when
listening to the audio of TV using the speakers of this unit. Select "Off" when the
ARC function is not used.
Audio
Sound Retriever:
Improve the quality of the compressed audio. Playback sound
of lossy compressed files such as MP3 will be improved. The setting can be
separately set to each input selector. The setting is effective in the signals of
48 kHz or less. The setting is not effective in the bitstream signals.
•
It cannot be set if the listening mode is Direct or Pure Direct.
•
This cannot be selected when either of the slots is selected with "Dirac Live"
Midnight:
Make small sounds easily heard. It is useful when you need to reduce
the volume while watching a movie late night.
•
It cannot be set if the listening mode is Direct or Pure Direct.
•
The setting cannot be used in the following cases.
– If "Loudness Management" is set to "Off" when playing Dolby Digital Plus
or Dolby TrueHD
– When the input signal is DTS:X and "Dialog Control" is other than 0 dB
Stereo Assign:
This function enables you to select a pair of speakers to output
stereo sound. Apart from the front speakers (Front), you can select the Surround
speakers (Surround), Surround Back speakers (Surround Back), Height 1
speakers (Height 1), and Height 2 speakers (Height 2).
Selectable
"Front"
"Surround"
•
The listening mode switches to "Stereo" if the audio output destination is
changed.
Zone B:
Select a method of outputting audio to ZONE B from among "Off", "On
(A+B)" and "On (B)".
•
In the following cases, "Zone B" cannot be selected.
– When ZONE 2 is On
–
When "System Setup" - "Speaker" - "Configuration" - "Zone 2 Preout"
) on the Home screen is set to "Zone 2"
Auto Phase :
The low frequencies are recorded with a delay for some
discs not made according to phase control standards. This function corrects
the phase shift when playing such discs. When "Auto" is selected, in addition
to the low frequency delay, the polarity and correlation are also detected and
corrected.
•
It cannot be set if the listening mode is Pure Direct.
•
This cannot be selected when either of the slots is selected with "Dirac Live"
