93
Playback
Room EQ
Dirac Live (*1):
You can select the equalizers measured with Dirac Live
) from "Slot1" to "Slot3". When disabling the equalizer, select
"Off".
•
The Dirac Live measurement results are saved in "Slot1" to "Slot3", but
you are able to register your own original sound quality with Manual Adjust
•
This cannot be selected when measurements are made using "Full Auto
MCACC".
MCACC EQ (*1)(*3):
Enable or disable the equalizer function that corrects for
distortion caused by the acoustic environment of the room.
Phase Control (*1):
Correct phase disturbance in the low range to enhance the
bass. This enables you to achieve powerful bass reproduction that is faithful to
the original sound.
Theater Filter (*2)(*3):
Adjust the soundtrack that was processed to enhance its
high pitch range, in order to make it suitable for home theater.
Standing Wave (*1)(*3):
Setting this "On" will control the effect of the standing
wave generated by the sound wave reflected by wall or similar interfering with
the original sound wave.
(*1) It cannot be set if the listening mode is Pure Direct.
(*2) It cannot be set if the listening mode is Direct or Pure Direct.
(*3) This function cannot be used if Dirac Live (
) is being used.
Furthermore, there is no effect even if it can be selected.
Level
Front:
Adjust the speaker level of the front speakers while listening to the sound.
Center:
Adjust the speaker level of the center speaker while listening to the
sound.
Subwoofer:
Adjust the speaker level of the subwoofer while listening to the
sound.
•
If you set the unit to the standby mode, the adjustments you made will be
restored to the previous statuses.
