Pioneer ELITE VSX-LX505 Скачать руководство пользователя страница 115

Страница: 115 / 212

115

Playback

etc. may occur.

• When playing files recorded with VBR (Variable bit-rate), the playback time

may not be displayed correctly.

•

This unit supports the gapless playback of the USB storage device in the

following conditions.

When continuously playing WAV, FLAC and Apple Lossless files with the

same format, sampling frequency, the number of channels and quantization

bit rate.

• To display an album title, artist name and album art of a file in WAV format,

make the folder structure and file names as shown below when saving music

files. The album art can be displayed by saving a .jpg file to display on the

screen in the folder of bottom level. Note that a large volume of .jpg file may

take time to be displayed, or may not be displayed.

Folder 1

Artist name

Folder 1-1

Album name

file 1-1

file 2-1

file 3-1

Folder 1-2

Album name

file 1-2

file 2-2

file 3-2

.jpg file

USB Storage Device Requirements

•

This unit can use USB storage devices that comply with the USB mass

storage class standard. Also the format of USB storage devices supports

FAT16 or FAT32 file system format.

•

If the USB storage device has been partitioned, each section will be treated

as an independent device.

•

Up to 20,000 tracks per folder are supported, and folders can be nested up to

16 levels deep.

•

USB hubs and USB storage devices with hub functions are not supported. Do

not connect these devices to the unit.

•

If an AC adapter is supplied with the USB storage device, connect the AC

adapter, and use it with a household outlet.

•

USB storage devices with security functions are not supported on this unit.

•

Media inserted to the USB card reader may not be available in this function.

Furthermore, depending on the USB storage device, proper reading of the

contents may not be possible.

•

In use of a USB storage device, our company accepts no responsibility

whatsoever for the loss or modification of data stored on a USB storage

device, or malfunction of the USB storage device. We recommend that you

back up the data stored on a USB storage device before using it with this unit.

•

Note that operation is not always guaranteed for all USB storage devices.

Содержание ELITE VSX-LX505





















































































































































































































Результаты поиска

Содержание ELITE VSX-LX505

Отзывы:

Похожие инструкции для ELITE VSX-LX505

Бренды по названию

Популярные бренды

Pioneer ELITE VSX-LX505, Инструкция по эксплуатации

Результаты поиска

Содержание ELITE VSX-LX505

Отзывы:

Похожие инструкции для ELITE VSX-LX505

Бренды по названию

Популярные бренды