Pioneer Elite SC-97, Руководство по эксплуатации

Страница: 38 / 171

38
Connecting your equipment
03
Connecting your TV and playback components
Connecting using HDMI
If you have an HDMI or DVI (with HDCP) equipped component (Blu-ray Disc player (BD), etc.), you can connect it
to this receiver using a commercially available HDMI cable.
If the TV and playback components support the
Control with HDMI feature, the convenient Control with HDMI
functions can be used (see Control with HDMI function on page 84 ).
( 5 V 0.9 A )
ASSIGNABLE
ASSIGNABLE
L
R
DVR/BDR
IN
SAT/CBL
IN OUT
MONITOR
OUT
IN 1
(CD)
PHONO
IN
1
(DVD)
BD 2
(SAT/CBL)
3
(DVR/BDR)
6 4 7 / /MHL
SIGNAL
GND
3
(HDZONE)
2 1
MAIN
SELECTABLE
ZONE 3
PRE OUT
ZONE 2
PRE OUT
ZONE 3
PRE OUT
ZONE 2
PRE OUT
OPTICAL COAXIAL
DIGITAL AUDIO
IN 1
(TV)
IN 2
(DVR/BDR)
IN 1
(SAT/CBL)
IN 2
(DVD)
7 / /MHL
HDMI OUT HDMI IN ASSIGNABLE - 1 7 -
VIDEO/AUDIO OUT 1
1 2 -
ARC CONTROL
DVR/BDR
IN
ZONE 3
PRE OUT
ZONE 2
PRE OUT
SAT/CBL
IN OUT
MONITOR
OUT
VIDEO/AUDIO
( 5 V 0.9 A )
ASSIGNABLE
ASSIGNABLE
L
R
IN 1
(CD)
PHONO
IN
1
(DVD)
BD
2
(SAT/CBL)
3
(DVR/BDR)
6 4
SIGNAL
GND
3
(HDZONE)
2 1
MAIN
SELECTABLE
OPTICAL
COAXIAL
DIGITAL AUDIO
IN
1
(TV)
IN
2
(DVR/BDR)
IN
1
(SAT/CBL)
IN
2
(DVD)
7 / /MHL
HDMI OUT HDMI IN
ASSIGNABLE - 1 7 -
VIDEO/AUDIO
OUT
1
1 2 -
ARC CONTROL
DIGITAL OUT
COAXIAL ANALOG R L
AUDIO OUT
HDMI IN HDMI OUT HDMI OUT
OPTICAL
HDMI/DVI-compatible
Blu-ray Disc player
Other HDMI/DVI-
equipped component
HDMI/DVI-compatible monitor
Select one
This connection is required in
order to listen to the sound of
the TV over the receiver.
! When connecting to an HDMI/DVI-compatible monitor using the HDMI OUT 2 terminal, switch the HDMI
output setting to
OUT 2
or
OUT 1+2
. See Switching the HDMI output on page 94 .
In the same way, when an HDMI/DVI-compatible monitor is connected to the HDMI OUT 3 terminal, switch
the
HDMI OUT 3
setting to
ON
( page 94 ). In this case,
MAIN/HDZONE
at
ZONE Setup
must be set to
MAIN
( page 117 ).
! For input components, connections other than HDMI connections are also possible (see Connecting your DVD
player with no HDMI output on page 39 ).
! If you want to listen to the sound of the TV over the receiver, connect the receiver and TV with audio cables.
— When the TV and receiver are connected by HDMI connections, if the TV supports the HDMI ARC (Audio
Return Channel) function, the sound of the TV can be input to the receiver via the HDMI OUT terminal, so
there is no need to connect an audio cable. In this case, set
ARC
at
HDMI Setup
to
ON
(see HDMI Setup on
page 85 ).
After setting the
ARC
, some time may be required for the connected device to be recognized and the sound to
be produced.
—
If you use a coaxial digital audio cable or RCA (analog) audio cable, you’ll need to tell the receiver which digi-
tal or analog audio input you connected the TV to (see The Input Setup menu on page 61 ).
—
Please refer to the TV’s operation manual for directions on connections and setup for the TV.
!
If the TV to be connected using HDMI supports 4K/60p, you can switch the 4K/60p signal input setting in
accordance with TV performance. When the 4K/60p setting is changed to 4:4:4 , the video image may not be
output normally unless the HDMI cable supports 4K/60p 4:4:4 24 bit (18 Gbps transmission). In such a case,
select
4:2:0 ( page 94 ).
! You cannot input 4K/60p 4:4:4 24 bit video from
HDMI IN 3
to the
IN 6
terminal. Use the
BD IN
,
HDMI IN 1
or
HDMI IN 2 terminal.
! The
HDMI OUT 3
terminal outputs 4K/60p 4:4:4 24 bit video when
MAIN/HDZONE
is set to
MAIN
. When it is
set to HDZONE , the 4K/60p 4:4:4 24 bit video is not output.