Using the GUIDE Plus+™ electronic program guide
05
49
En
English
The Setup Area
The Setup Area is where you can set up GUIDE Plus+ for
your particular region, TV reception conditions, and so
on.
Making changes to your GUIDE Plus+ setup
1
Select ‘Setup’ from the Menu bar.
2
Highlight the part you want to change.
You can change the Language, Country, Postal Code
1
and the External Receiver settings.
3
Press
ENTER
to confirm.
GUIDE Plus+ FAQ and
troubleshooting
This FAQ covers only a few questions. For a complete list
please consult the GUIDE Plus+ website at:
www.europe.guideplus.com
FAQ
• When I tried setting up my external receiver I could not
get any of the attempts to work, what should I do?
A: There could be several reasons why your external
receiver could not be controlled.
– The connections could be wrong. Make sure that
the G-LINK cable is connected to the G-LINK
connector on the recorder and the IR blaster is in
front of the external receiver, pointing towards the IR
receiver of your external receiver. See
Connecting to a
cable box, satellite receiver or digital terrestrial receiver
on page 16.
– The code that is listed under your brand could be
wrong. Please try other codes for your brand under
satellite, cable or terrestrial. Go to the Setup Area and
choose one of the three options (cable, satellite or
terrestrial) that you have not already tried. Follow the
on-screen prompts to make sure that GUIDE Plus+
can change channels on your external receiver. If it
does not work, repeat the process, choosing different
reception and external receiver combinations until
you have tried all the codes for your brand of receiver
that are already in the GUIDE Plus+ system. If it still
does not work, see below on how to receive new
codes overnight.
– The unit has not yet received new codes. The nightly
data downloads frequently include new codes for
controlling external receivers. Please tune your
external receiver to your local host channel and leave
it on overnight. Switch this recorder into standby. The
next morning, please perform the GUIDE Plus+
setup again to see if your external receiver can now
be controlled.
– The external receiver that you use is currently not
supported. If, after leaving your external receiver on
overnight, and doing the Reception and External
Receiver Setup again, it still does not respond, please
call Customer Support to report your brand and
model.
Note
1 Making changes to the Country or Postal Code settings may require a new download of TV listings information. This can take up to 24 hours.
DVR-04_HDD_UK.book 49 ページ ２００４年９月１０日 金曜日 午後７時３分
