Pioneer DP-43FD, Руководство по эксплуатации

Страница: 23 / 68

The operation procedure for
inputting characters manually
Numeric characters such as IP address can be
entered on the input screen using the number buttons
(0 to 9) or

and ENTER on the remote control.
IP Address
Netmask
Gateway 123
Press
1
ENTER
at the boxes in which characters
are to be entered, and the input screen will
appear.
Numeric
1 2 3 4 5 6 7 8 9 0
Edit
Press
2 
to select the desired input mode.
Press the number buttons (0 to 9) or
3 
to
select a number/character, then press
ENTER
.
Input character list
Numeric
1 2 3 4 5 6 7 8 9 0
Edit
Cancel Left Right Complete Del.Char.
The same operation as * RED , GREEN , BLUE , YELLOW and RETURN can be performed by
selecting each of the items and pressing ENTER .
“Del.Char.” stands for deleting characters.
Repeat the step 3 to display all of the desired
4
characters/numbers in the input field.
Example: The screen for inputting numeric characters
Numeric
123
1 2 3 4 5 6 7 8 9 0
Edit
NOTE
Press • RETURN (Del.Char.) to delete a number/
character you have input.
To change a number/character you have input, press
•
GREEN (Left) or BLUE (Right) to select the number/
character you want to change, and press RETURN
(Del.Char.). Then, press

to select a new number/
character you want to input, and press ENTER .
Press
5
YELLOW (Complete)
to fix the numbers
which have been input.
IP Address
Netmask
Gateway 123
6
Repeat step 1 to 5 to finish inputting all the
required characters.
Press
9
ENTER
to test the connection.
For setting the IP address, press
10 
to select
“Yes” or “No”, then press
ENTER
.
Do you obtain the IP address
automatically?
IP Address
Netmask
Gateway
Next
Yes
No
If selecting “Yes”: The IP address is automatically •
obtained.
If selecting “No”: The IP address, netmask, gateway
•
and primary and secondary DNS IP addresses are
manually entered using the screen for inputting
characters. (See right.)
Press
11 
to select “Next”, then press ENTER .
For testing the connection to the internet, after
12
confirming the settings, press

to select
“Test”, then press ENTER .
“Test” is available only when setting to obtain the IP •
address automatically. “Test” cannot be selected if the
IP address has not been obtained automatically.
Confirm the current setting.
: xxx xxx xxx xxx
: xxx xxx xxx xxx
: xxx xxx xxx xxx
: xxx xxx xxx xxx
: xx:xx:xx:xx:xx:xx IP Address
Netmask
Gateway
DNS Address
MAC Address
Test
Complete
As a result of the test, if the internet connection fails, •
enter the setup values manually.
Press
13

to select “Complete”, then press
ENTER .
Settings
23
Settings
Selected by
pressing

Selected by
pressing
