Pioneer AVIC-X3II, Руководство по эксплуатации

Страница: 67 / 172

p
Touching other than [
Import from Disc
] al-
lows you to select a background image
stored on the Pioneer DVD Map Disc.
6 Touch a picture you want for the back-
ground.
7 Select how to display the picture.
You can select the following items:
Centre
:
Selected picture is displayed at the centre of
the screen.
Repeat :
Selected picture is repeated in a pattern to
cover the whole screen.
The background image starts changing. After
a short while, the new background image ap-
pears.
p
When you select images stored on the
Pioneer DVD Map Disc, you cannot select
the layout method.
p
When the picture starts to change, do not
turn off the vehicle engine until the mes-
sage appears to indicate that the picture
has finished changing.
8 Touch [Done].
On this screen, you can select the following
items:
Select another Picture :
This is selected when you want to change to
another picture. Return to Step 5.
Change to another background :
Select if you want to successively change the
Splash Screen, AV operation screen back-
grounds or the Navigation backgrounds. Re-
turn to step 3.
p
When the navigation system is reset, or the
language setting is changed, the back-
ground picture may change back to the ori-
ginal picture. (There is also a possibility
that the system will revert to the original
picture for some other reason.) If this hap-
pens, set the background picture again.
Setting Vehicle Dynamics
Display
You can change the values displayed by the in-
struments on the left and right of
Vehicle Dy-
namics
Display.
Until the sensor
’
s initial learning is complete,
only the voltage and clock are displayed.
1 Switch to Vehicle Dynamics Display.
=
For details concerning operations, refer to
Switching the current position screen display
mode
on page 39.
2 Touch the left or right instrument.
Touch panel keys are displayed.
3 Touch the items you want to display.
You can select the following items:
Voltage :
Displays the power supply and voltage sup-
plied from the battery to this system.
Acceleration :
Displays acceleration in a forward direction.
+
sign indicates acceleration while
-
sign indi-
cates deceleration.
Side Acceleration :
Displays acceleration in a side direction, such
as when turning.
+ sign indicates a right turn,
while - sign indicates a left turn.
Angular Velocity :
Displays the vehicle
’
s turning angle over one
second (how far it has turned in a second).
Slope :
Displays the vehicle
’
s vertical movement. +
side represents the rising angle, and - side the
falling angle.
Editing the Navigation Utilities
Engb
67
Chapter
05
Editing
the
Navigation
Utilities