Pinguely-Haulotte HA20PX, Руководство по ремонту

Страница: 87 / 282

PREVENTIVE MAINTENANCE SHEET
3 - Preliminary operations
• Put the machine in the maintenance configuration (see corresponding para-
graph).
• Switch off electric power (see corresponding paragraph).
2 - Checking the level
• Turn the wheel so that one cap (1) is on a horizontal line and the other (2) is
on a vertical line.
• Unscrew the cap (1) and check the level that should be up to the hole. Top up
if necessary.
• Screw the cap back into place.
NB: Only use the oil recommended by the manufacturer.
3 - Changing the oil
• In the same position, unscrew the 2 caps and let the oil flow out.
• Re-fill as described above.
• Screw the caps back into place.
NB: Collect old oil to prevent pollution of the environment.
4 - Additional operations
• Put the machine back into the operational configuration.
Caution!
Use a container to collect oil
to prevent pollution of the
environment.
Caution!
Make sure that the machine
is properly stabilised, and
that the lifting means are in
good condition and of
sufficient capacity.
HA16/18PX - HA46/51JRT
HA20/26 PX - HA61/80JRT
H14T(X) - H16TP(X)
HB40/44J
CHECKING - CHANGING THE OIL
OF A WHEEL REDUCING GEAR
Sheet P007 Folio 1/1