Pine Research MSR 636A, Руководство пользователя

Страница: 33 / 176

27
DRU10002 (REV 004 / JAN 2017)
2.6 Typical Rotating Ring-Disk Electrode Design
Rotating ring-disk electrode tips mount on to a special two-conductor shaft
(see Figure 2.7). In some cases, the tip can be taken apart into smaller pieces.
Figure 2.7: Typical Rotating Ring-Disk Electrode (RRDE) Tip with Shaft
43 Insulating Shroud on Tip
This insulating shroud material is typically a
polymer such as PTFE, PEEK or PCTFE.
44 Plastic Cover Cover protects electrode when not in use.
45 Ring Threads on Tip These threads contact the ring electrode.
46 Disk Core on Tip
This disk core is in electrical contact with the
surface of the disk electrode.
47 Insulating Shroud on Shaft
This insulating shroud material is typically a
polymer such as PTFE, PEEK or PCTFE.
48 Ring Contact Area
This metal area on the shaft is normally in
electrical contact with the ring electrode.
49 Disk Contact Area
This metal area on the shaft is normally in
electrical contact with the disk electrode.
50 Shaft Mounting Area
This electrically-isolated portion of the shaft is
used to physically mount the shaft in the
motor coupling.
43
44
45
47
50
46
49 48