Pima PIMAGUARD, Инструкция по установке и эксплуатации

Страница: 31 / 62

Sentinel & PimaGuard
Installation Guide 31
Atia 13489
Frame Structure - [S]AAAA----EE\0A\0D
S = options:
8 = Input from Line (PIMA format)
3 = Input from Line (others format)
9 = Input from Radio (PIMA format)
1 = Input from Radio (others format)
4 = Radio ELL6 only
A = 4 digit account, decimal
E = 2 digit event
Atia 123459
Frame Structure - [S]AAAA----EE\0A\0D
S = options:
5 = Input from Line (PIMA format)
3 = Input from Line, DESK only
9 = Input from Line (non-PIMA)
4 = Input from Radio (PIMA format)
1 = Input from Radio, DESK only
2 = Input from Radio (non-PIMA)
A = 4 digit account, decimal
E = 2 digit event
FBI
Frame Structure – ##AAAAEE\0D (Applicable to PAF/NPAF/EPAF*/SIA/4x2)
## - Incoming Sentinel/Communication/Repeater channel number
A = 4 digit account, decimal
E = 2 digit event
Frame Structure – \0A## AAAA 18 QEEE PP ZZZ \0D(Applicable to CID/PID)
## - Incoming Sentinel/Communication/Repeater channel number
A = 4 digit account, decimal
18 – permanent
Q= Event type:
E – Alarm/Disarming
R – Reset/Arming
P – Previous event
U – Unknown event
E = 3 digit event
P= 2 digit partition, decimal
Z= 3 digit zone/user, decimal
* When the input is External, the FBI protocol does not distinguish between PAF/NPAF/EPAF and 4x2.
When the output is External, the 4x2 protocol is the default one. If required, use FBI External.
FBI PAF=>CID
Frame Structure – ##AAAAEE\0D (applicable to SIA/4x2)
Frame Structure – \0A## AAAA 18 QEEE PP ZZZ \0D(Applicable to PAF/NPAF/EPAF/CID)
Same as FBI, except PAF/NPAF/EPAF event is converted to CID. See "Events Conversion Table" on page 36.
FBI CR=>20
Frame Structure – ##AAAAEE\14 (Applicable to PAF/NPAF/EPAF/SIA/4x2)
Frame Structure – \0A## AAAA 18 QEEE PP ZZZ \14 (Applicable to CID)
It is used the same as FBI, except the frame-end: 0x14 instead of 0x0D.
GALAXY
Frame Structure – G[L0R1]**#0 AAAA-EE 00\0D\0A (applicable to all the formats)
[L0R1] - 0: Input from Line (or other)
1: Input from Radio
** - Decimal, 0-99 (00 is default) from Decoder ID in the received format
# - Channel number (1...F, 0). The numbers start from 1 to F in Hexadecimal, 0 = the 16th number. If count restart, it
restart from 0
A = 4 digit account, decimal
- = permanent
E = 2 digit event
00 = permanent
Idle frame - \50**\0D\0A.
** - Decimal, 0-99 from the Decoder ID on General->Configuration See "Configuration" on page 13. For each incoming format
PAF/NPAF/EPAF/CID/PID/SIA/4x2 see "Events Conversion Table" on page 36.
FBI GALAXY 1
Frame Structure - ##AAAAEE\0D (Applicable to PAF/NPAF/EPAF*/SIA/4x2)
This format is the same as FBI, except the Idle frame - \50**\0D\0A
** - Decimal, 0-99 from Decoder ID on General->Configuration. See "Configuration" on page 13.