Installation
Operating Manual PSEN sg2c
1003267EN02
30
}
Align actuator guide plate and safety switch. Please note the distance between the
handle unit and the safety switch (see chapter
Adjustment [
39]
).
}
Fix actuator guide plate and safety switch with M5 DIN EN ISO 4762 socket head
cap screws (hexagon socket, e.g.: Bossard: BN3 (without shaft), galvanised blue,
torque setting MA = 5 Nm). Use washer M5 DIN125A (e.g.: Bossard: BN 715, galvan
ised blue, dimension: 10 x 5.3 x 1) for this.
The fixing screws on the safety switch are located under the cover of the escape re
lease. Use an appropriate screw adhesive (e.g. Loctite 2700) to protect the socket head
cap screws from working loose.
When using only the unprotected screws [1] that can be reached at the side for in
stalling the actuator guide plate, oneway screws have to be used for manipulation pro
tection. When using the screws that are protected against manipulation under the bolt
tongue [2], this is not necessary.
[1]
[2]