Pilz PMUT X1P, Руководство по эксплуатации

Страница: 25 / 28

PMUT X1P
Operating Manual PMUT X1P
20587-EN-06
25
Environmental data 778010 788010
Condensation during operation Not permitted Not permitted
EMC EN 61000-6-2, EN 61326-3-1, EN
61496-1
EN 61000-6-2, EN 61326-3-1, EN
61496-1
Vibration
In accordance with the standard EN 60068-2-6 EN 60068-2-6
Frequency 10 - 55 Hz 10 - 55 Hz
Amplitude 0,35 mm 0,35 mm
Airgap creepage
In accordance with the standard EN 60947-1 EN 60947-1
Overvoltage category III / II III / II
Pollution degree 2 2
Rated insulation voltage
250 V 250 V
Rated impulse withstand voltage 4 kV 4 kV
Protection type
Housing IP40 IP40
Terminals IP20 IP20
Mounting area (e.g. control cab-
inet)
IP54 IP54
Mechanical data 778010 788010
Mounting position Any Any
Mechanical life
10,000,000 cycles 10,000,000 cycles
Material
Bottom PPO UL 94 V0 PPO UL 94 V0
Front
ABS UL 94 V0 ABS UL 94 V0
Top PPO UL 94 V0 PPO UL 94 V0
Connection type Screw terminal Spring-loaded terminal
Mounting type
plug-in plug-in
Conductor cross section with screw
terminals
1 core flexible 0,2 - 2,5 mm², 24 - 12 AWG –
2 core with the same cross sec-
tion, flexible with crimp connect-
ors, no plastic sleeve 0,2 - 1 mm², 24 - 16 AWG –
2 core with the same cross sec-
tion, flexible without crimp con-
nectors or with TWIN crimp con-
nectors
0,2 - 1,5 mm², 24 - 16 AWG
–
Torque setting with screw terminals 0,5 Nm –
Conductor cross section with
spring-loaded terminals: Flexible
with/without crimp connector –
0,2 - 1,5 mm², 24 - 16 AWG
Spring-loaded terminals: Terminal
points per connection – 2
Stripping length with spring-loaded
terminals –
8 mm