PMUT X1P
Operating Manual PMUT X1P
20587-EN-06
17
NOTICE
Shorts across contacts must be detected in order to achieve PL e of EN ISO
13849-1. The independence of both ESPE channels is either monitored
through the light grid itself or through the muting controller.
INFORMATION
If you are only using 2 muting sensors, connect these to S1, S1+, S2- and
S2, S2+, S2-.
Muting lamp
LA+
LA-
LB-
LB+
Start circuit
S1: Key switch
S3: Start button
NOTICE
The path of the ESPE light beam must be clear when the PMUT X1P mut-
ing controller is started through operation of the start button. Only then is
the muting controller ready for operation.
Feedback loop
without feedback loop monitor-
ing
with feedback loop monitoring
Link or contacts from external
contactors
