Commissioning
Operating Manual PMCprimo MC
1003813-EN-03
| 44
7
Commissioning
7.1
Safety guidelines
This chapter describes the communication between a PMCprimo MC and a servo amplifier
PMCprotego D during initial commissioning.
Further information on commissioning the servo amplifier can be found in the operating
manual.
Please note the following safety guidelines during commissioning:
}
When commissioning, you must ensure that the control systems do not present a risk to
persons, plant or machinery. Appropriate protection and precautionary measures must be
put in place.
}
To avoid personal injury and material damage, only qualified, trained personnel should
work on the devices. Qualified technical staff are those who are familiar with the trans-
port, installation, commissioning, maintenance and operation of the device. They will be
familiar with the relevant standards and regulations.
}
Prior to commissioning the machine manufacturer must produce a hazard analysis for the
machine and take appropriate measures to ensure that unexpected movements do not
cause injury to people or damage to equipment.
}
Only specialist staff with extensive knowledge of drive technology and control engineering
should be permitted to program a running drive online.
}
Data stored on data media is not protected from unintended changes by third parties.
Data must be checked for accuracy before it is downloaded to the control system.
}
Prior to installation and commissioning, information in this operating manual, and in par-
ticular the safety guidelines, must be carefully read and considered (see Chapter entitled
“Safety”). Personal injury and material damage may result if devices are handled incor-
rectly.
}
It is essential to comply with the technical details and specifications (type label and docu-
mentation).
