Pilz PIT m4SEU, Руководство по эксплуатации

Страница: 23 / 68

Function description
Operating Manual PIT m4SEU
1004648-EN-02
| 23
5.5 Interface for status information
Various status information can be signalled via the interface for status information (see
Block diagram [ 16] ). The status information can be evaluated through a controller.
The status information is subdivided into the following information classes:
} Operator actions
– Insert transponder key
– Remove transponder key
– Select operating mode
} Messages (e.g. application error, malfunction, response)
NOTICE
When the operating mode is selected (SIo0 … SIo3 = 3h, 8h ... Bh) and
when there is a device error (Dh), the information remains present indefin-
itely. All other information stays active for just
200 ms . After that time the
selected operating mode is again displayed.
Status information Information class SIo3
(MSB)
SIo2 SIo1 SIo0
(LSB) Value
(in
Hex)
Operating mode preselection is
switched [5] Response 0 0 0 0 0h
Reserve - - - 0 0 0 1 1h
Transponder key 5 – Inserted [1] Operator action 0 0 1 0 2h
OM5 selected Operator action 0 0 1 1 3h
Transponder key 1 – Inserted [1] Operator action 0 1 0 0 4h
Transponder key 2 – Inserted [1] Operator action 0 1 0 1 5h
Transponder key 3 – Inserted [1] Operator action 0 1 1 0 6h
Transponder key 4 – Inserted [1] Operator action 0 1 1 1 7h
OM1 selected Operator action 1 0 0 0 8h
OM2 selected Operator action 1 0 0 1 9h
OM3 selected Operator action 1 0 1 0 Ah
OM4 selected Operator action 1 0 1 1 Bh
No permission [2] Application error 1 1 0 0 Ch
Device error [3] Error 1 1 0 1 Dh
Pushbutton operated incorrectly [4] Application error 1 1 1 0 Eh
Transponder key removed Operator action 1 1 1 1 Fh