Pilous ARG 250 plus S.A.F., Инструкция по эксплуатации, Страница: 42 / 47

HV - are highly refined oils with additives against oxidation, corrosion, foaming, for reducing wear and tear and a viscosity modifier.
High-quality oils with outstanding oxidation stability and anti-abrasive properties, low foaming quality and good resistance against
creation of permanent emulsion and especially with excellent viscosity temperature dependence. They are intended for similar
purposes like HM class oils, but with increased requirement for a very low dependence of oil viscosity on temperature, particularly for
h.-p. mechanisms of mobile machines operated within a wide range of ambient temperatures.
Biologically Degradable Liquids
The ecological standpoint must be taken into account especially with hydraulic mechanisms in plants, which come into contact with
water outdoors, with equipment and machines in agriculture and forestry, building machine drives and mobile technology on general.
Lubrication properties of environmentally-friendly liquids are as a rule identical to those of mineral oils. As regards the resistance
against ageing and tolerance of liquids to construction materials, no generally valid knowledge is available at present. The using of
the liquid must be tested. Nevertheless, practical experience shows clearly that carefully adjusted systems operated with
environmentally-friendly liquids run smoothly.
0°C 20°C 40°C 60°C 80°C
Kind of oil
2 -1
Kinematic viscosity in mm .s at the temperature
Setting
temperature in °C
MOGUL HM 32
MOGUL HM 46
MOGUL HM 68
MOGUL HV 32
MOGUL HV 46
220
400
700
180
350
100
170
170
67
110
32
46
68
32
46
15
18
26
17
25
8,5
11
14
11
14
-40
-30
-28
-40
-36
Hydraulic Mineral Oils
HM performance class according to CETOP RP 91H European specification in viscosity classes ISO VG 32 and 46. HM 32 oils are
recommended for ambient temperatures around 0°C and below. HM 46 oils are recommended for ambient temperatures between
+5 and 40°C.
The Pilous bandsawing machines are filled with PARAMOL HM 46 oil. Oil renewal is recommended within
a period of less than 3000 operating hours. Check consequently the oil level at the oil level gauge located on the
hydraulic unit in the machine base.
Specification
CETOP RP 91 H
HM 32 HM 46
AGIP
ARAL
AVIA
ČEPRO
BP
BULGARIA
CASTROL
DEA
ELF
ESSO
FAM
FINA
INA
KLÜBER
HUNGARIA
MOBIL
ÖMV
PARAMO
POLAND
ROMANIA
RUSSIA
SUN
SHELL
TEXACO
VALVOLINE
OSO 32
VITAM GM 32
AVILUB RSL 32
MOGUL HM 32
ENERGOL HLP 32
MX-M/32
HYSPIN AXS 32
ASTRON HLP 32
ELFOLNA 32
NUTO H 32
FAMHIDO HD 5030
HYDRAN 32
HIDRAOL 32 HD
LAMORA HLP 32
HIDROKOMOL P 32
MOBIL DTE 24
HLP 32
PARAMOL HM 32
HYDROL 20
H 32 EP
IGP 18
SUNVIS 832 WR
TELLUS OIL 32
RANDO HD A 32
ULTRAMAX AW 32
OSO 46
VITAM GF 46
AVILUB RSL 46
MOGUL HM 46
ENERGOL HLP 46
MX-M/46
HYSPIN AWS 46
ASTRON HLP 46
ELFOLNA 46
NUTO H 46
HD 5040
HYDRAN 46
HIDRAOL 46 HD
LAMORA HLP 46
HIDROKOMOL P 46
MOBIL DTE 25
HLP 46
PARAMOL HM 46
HYDROL 30
H 46 EP
IGP 30
SUNVIS 846 WR
TELLUS OIL 46
RANDO HD B 46
ULTRAMAX AW 46
Oil Renewal and Filter Replacement
• unscrew the red cover • take out the filter sleeve • change oil •
insert the new filter sleeve • fill in fresh oil • screw in the red
cover • vent the whole system
Cauting: The oil and the filter sleeve are special waste.