Pilous ARG 250 plus S.A.F., Инструкция по эксплуатации

Страница: 3 / 47

Warranty letter - service
Warranty letter is a separate part of the instruction manual.
Warranty period length:
see warranty letter.
Terms of warranty letter validity
:
• Machine transport, manipulation and storage according to the instruction manual.
• Machine usage, operation and maintenance according to the instruction manual.
• Machine connection to the electrical grid supply according to the instruction manual.
The warranty letter does NOT include :
•The machine user´s or third person violent and mechanical machine damage.
• Remediless event (elementary disaster).
• Machine damage during transport.
• Machine storage or placing in wet, chemical or otherwise dangerous environment.
0. In general
This instruction manual provides the users assistance and information about the PILOUS bandsaw and the possibilities of use
corresponding to its purpose. The instruction manual contains important instructions for a safe, adequate and economically efficient
operation. Observing the operating instructions will prevent hazards, reduce the repair and outage time costs, and increase the
machine reliability and life. The instruction manual must always be available at the machine site. The instruction manual must be
read and used by the staff entrusted with the machine installation, transport and storage, use/operation, maintenance and disposal.
In addition to the instruction manual and the binding rules related to accident prevention valid in the user´s country and at the service
site. It is also necessary to observe the approved rules for safe and professional work.
Address any possible comments on the warranty letter by fax, or mail to the address showed on the warranty
letter.
Notice for the user:
The seller is obliged to issue warranty letter to the user when the product is dispatched. The warranty letter must be signed and
confirmed by the seller´s stamp with the date of issue and product serial number. The seller is obliged to introduce the product to the
user.
Data needed to apply for the warranty (after warranty) machine repair:
• Machine type
• Warranty letter number (same as machine serial number)
• Warranty letter issue date
0.1. Safety provisions
The machine design complies with the technical status and the approved safety and technical rules. In spite of this the user's or the
third persons' health can be endangered and/or the machine or other tangible goods may be unfavorably influenced during the
operation of the machine. In order to prevent such hazards it is unconditionally necessary to observe the safety instructions in this
instruction manual. These safety instructions must be read and understood by the respective persons before the machine has been
put into operation. Failure to observe these instructions may cause serious property damage and damage to health! The safety
instructions are marked in this instruction manual with safety symbols / danger spot signs.
Use ear plugs! A-weighted emission sound
pressure level 76 dB(A). A-weighted sound
power level emitted by the machinery 91 dB(A).
This instruction manual should be read before
the use of the band saw to make sure that it has
been understood correctly!
Use protective gloves!
Use goggles!
Danger spot - be careful! Dangerous voltage!
Use steel toe boots or work shoes
with skid-proof sole!
Danger of injury by air-borne particles!
Danger of injury by slashing!
Danger of injury by press!