Pilous ARG 105 mobil, Инструкция по эксплуатации

Страница: 11 / 31

Basic features
4.1. Control panel
Ensures emergency stop of the saw blade motor and coolant pump. You
can put the machine back to operation only after you unlock the switch
by pulling or twisting.
The button is placed on the motor.
START - STOP button - starts and stops the saw blade motor. In machines
with saw blade cooling, it also stops and starts the coolant pump. In
machines with a three-phase two-speed motor
(V400) , these buttons are
duplicated with a switch in the control handle. In machines with a single-
phase motor the motor switches on/off with only with the switch in the control
handle.
You can change the cutting speed with the controller on the switchboard on the motor.
SAW BLADE SPEED CONTROLLER
SAW BLADE START - STOP
Before you start the saw blade motor, always make sure that the saw blade is not in
contact with the workpiece at the point of cutting.
TOTAL STOP
Danger of injury!
Use protective equipment!
Caution: Change the cutting speed only if the motor is stopped
(the saw blade is still)
1 - 40m/min
2 - 80m/min
V400 control panel