Pilous ARG 105 mobil, Инструкция по эксплуатации

Страница: 3 / 31

6. Machine Maintenance
6.1. Maintenance and Inspection
6.2. Repairs
7. Failures - Potential Causes and Remedies
8. Saw Blades
8.1. Saw Blade Design
8.2. Selection of Tooth Size
8.3. Optimum workpiece clamping
8.4. Running-in New Saw Blades
8.5. Factors Influencing Saw Blade Service Life
8.6. Values Recommended for Cutting
9. Wiring Diagram and Layout of Switching
and Safety Elements
9.1. Wiring Diagram
ARG 105 mobil, ARG 130 (TK), ARG 130 K
9.2. ARG 130 super wiring diagram
9.3. Layout of switching and safety elements in
ARG 130 super
10. Assemblies
10.1. Guide Head Assembly
10.2. Arm Assembly
10.3. The Table, Joint and Vice Assembly
10.3.1. The Table, Joint and Vice Assembly in
ARG 105 mobil
10.3.2. The Table, Joint and Vice Assembly in
ARG 130 (TK)(K)
10.4. Cooling Assembly in ARG 130
Contents:
0. General
0.1. Safety Provisions
0.2. Scope of Use / Use According to Designation
0.3. Requirements on operators
0.4. Machine Requirements - Safety Devices
0.5. Protective Covers
1. Transport and storage
1.1. Surface Protection
1.2. Packing
1.3. Disassembly/Repacking
1.4. Disposal
2. Technical Data
3. Installation
3.1. Space requirements
3.2. Machine installation
3.3. Connection to the mains
3.4. Nameplate
4. Machine description
4.1. Control Panel
4.2. Vice - Workpiece Clamping
4.3. Cutting Angle Settings
4.4. Saw Blade Guidance
4.5. Replacement, Tensioning
and Adjustment of the Saw Blade
4.6. Guide Heads Adjustment
4.7. Cooling System
5. Commissioning
5.1. Security Check
5.2. Cutting Procedure
Dear customer,
thank you for purchasing our product. We wish you a lot of success with it in your business. Please pay close attention to
the following instructions in order to ensure faultless operation of the machine.
© 2019 All rights, particularly the right to make copies of, to distribute and translate this instruction manual, are
reserved. No part of this instruction manual may in any form (printing, copying, microfilm or other means) be reproduced
or stored, processed, copied or distributed using electronic systems without a permission by PILOUS.
ver. 1/10/2019
ORIGINAL INSTRUCTION MANUAL