PIAGGIO PORTER 1.3 16V 2008, Руководство по обслуживанию

Страница: 579 / 892

Fork groove width: 10.05 - 10.12 mm *-2
12 Synchroniser movement key
Thickness = 5.0 - 5.2 mm, composed by 3 pieces.
13 Synchronisation ring No. 3
Not interchangeable with component 9
14 Needle bearing
This bearing is interchangeable with bearing 4 of the input shaft.
Never expand the opening of the bearing with a value exceeding the input shaft di 5 mm, upon
fitting and removal.
The opening of the bearing shall not exceed 37 mm.
15 2nd gear
Inside diameter: 37.00 - 37.025 mm
Real thickness: 36.27 - 36.33 mm
Clearance regarding the synchronisation ring:
0.95 - 1.35 mm
Limit: 0.9 mm
Axial clearance: 0.1 - 0.4 mm
16 Conical spring washer
Components 6 and 16 have the same function.
Secure each part of the 2nd gear so that the part of the washer having the larger diameter, is facing
the sub-gear side.
17 2nd sub - gear
Components 15 and 17 are considered parts assembled together with ring 18.
* 18 Shaft spring washer
Components 4 and 18 are identical.
19 Transmission gear
Outside diameter of the bearing rolling section:
31.971 - 31.991 mm
20 Radial ball bearing
Fit the bearing so that the side having the gasket is facing backwards.
* 21 Circlip
This component is identical to part 11 of the input shaft: Part selected due to thickness.
* - 1 When spring washer 1 is removed, all components up to 8 can be removed together.
* - 2 When spring washer 18 is removed, all components from 10 to 18 can be removed together.
PORTER 1.3 16V
Gear-box
GE - 579