PIAGGIO PORTER 1.3 16V 2008, Руководство по обслуживанию

Страница: 9 / 892

Specification Desc./Quantity
are classified as SD, SE, SF, etc. ; while those for diesel en-
gines are classified as CC, CD, etc.
A/Y Assembly A group of components or an assembled component which in-
cludes more than two single parts or subassembly parts.
ATDC: after Top Dead Centre (ATDC)
BTDC: before Top Dead Centre (BTDC)
DLC: Data Link Connector.
DLI: Distribution less ignition
DTC: Diagnostic Trouble Code indicates a code for injection system
failures.
ECU: Electronic Control Unit - Electronic unit.
EFI: Electronic Fuel Injection
ESA: Electronic Spark Advance
ETR: Electronic Tuning Radio - Radio with variable frequency, the
value varies according to voltage or current applied.
EX: Exhaust pipe / Muffler.
F/L: Fuse
GND: Bodywork ground
HC: Hydrocarbon
IGN: Injection system ignition
IN: Inlet
ISO: International Standards Organisation.
LED: Low Emission Diode
LH: Left Handed
LHD Left hand drive vehicle
MIL: Malfunction Indicator Light / Self-diagnosis warning light
MP: Multi Purpose Multipurpose, indicates that it has more than one application.
M/T: Manual / Transmission
NO: Nitric oxide
O/S: Over Size Oversize means that upon fitting, there is excessive clearance
due to extended use or due to frequent removal/ refitting oper-
ations. If the piece to be fitted (e.g. piston) is replaced with a
part with larger dimensions, the other part to be coupled can
be still used. "Oversized" parts are those which have larger di-
mensions with respect to standard parts.
PCV: Positive Crankcase Ventilation
RH: Right handed
RHD: Right hand drive vehicle
S/A: Subassembly A subassembly is a component which includes more than two
single parts which are welded or fixed with stud bolts one to the
other, constituting a single component.
SAE: Society of Automotive Engineers - Standardisation body for the
automotive industry. Lubricating oils are classified with a SAE
number. These identifying numbers are set by the Society of
Automotive Engineers of the United States of America. The
larger the SAE number, the thicker the oil is.
SST: Special Service Tool Special tool: tool designed for a specific purpose.
STD: Standard - when making reference to vehicle parts, "standard"
indicates those parts which are installed by the manufacturer
and have standard dimensions.
T: Torque This refers to the tightening torque
TDC: Top Dead Centre (TDC)
U/S: Under/ Size Undersize - as with "oversized" parts, if the mechanical part
(e.g. bushing and bearing) is replaced with a part having a
smaller diameter, the other coupled part can be reused. "Un-
dersized" parts are those parts with smaller dimensions with
respect to standard parts.
VSV: Vacuum Switching Valve Vacuum Switching Valve
W: With With
4WD: Four-Wheel Drive: vehicle with 4 driving wheels.
General information
This section comprises general information about the manual use and the vehicle, besides important
notes relevant to safety.
PORTER 1.3 16V
General guidelines
N GEN - 9