5 Installation
20
Version: 1.1.4
MP155E
V-273 VC Linear Actuator
5.3
Installing the V-273 into a Mechanical Mounting
NOTICE
Increased friction due to lateral forces on the runner!
Lateral forces acting on the runner of the V-273 increase the friction between the runner and
internal drive components. Increased friction impairs the motion of the runner and increases
wear on the drive components.
Avoid lateral forces on the runner of the V-273.
NOTICE
Excessively long screws!
Screws inserted too deeply will damage the V-273.
Pay attention to the maximum screw-in depth for the mounting holes (p. 40).
Only use screws of the correct length for the respective mounting holes.
NOTICE
Distorting the V-273 when mounted on uneven surfaces!
Fixing the V-273 onto an uneven surface can distort the V-273. Distortion reduces the accuracy.
Fix the V-273 onto
an even surface. The recommended flatness of the surface is ≤20 µm.
For applications with large temperature fluctuations:
Only fix the V-273 onto surfaces that have the same or similar thermal expansion
properties as the V-273 (e.g., surfaces made of aluminum).
INFORMATION
V-273.440 model: The moving part of the mechanical mounting can be connected to the
runner of the linear actuator.