PI V-273 VC, Руководство пользователя, Страница: 17 / 53

3 Product Description
V-273 VC Linear Actuator MP155E Version: 1.1.4 13

Coefficients of the polynomial for mechanics linearization

Settings for the sensor: E.g. interpolation rate, corrections of hysteresis, phase and
offset, gain values

Data for checking the validity when the contents of the ID chip are read out
When switched on or rebooted, controllers from PI read the data from the ID chip.
For more information on the ID chip recognition, see the manual of the controller used.
INFORMATION
The V901B0030 adapter must not be used if a controller other than a PI controller is to be
used.
In addition, the following conditions must be met by the controller:

It can process differential sin/cos encoder signals.

It has digital inputs for the differential signals of the reference switch of the linear actuator.
 It can operate 1-phase DC motors with ±1.5 A.
3.5.5 Guiding
The V-273.44x models are equipped with a recirculating ball bearing. This makes the motion of
the runner insensitive to lateral forces and torques.