phyCORE-MPC565 QuickStart Instructions
2.5.3
Downloading Hello_Fl to the MPC565 On-Chip Flash
•
Make sure Jumper JP17 on the phyCORE-MPC565 Development
Board is closed at default position 1+2 (
refer to Figure 3
).
•
From the pull-down menu, at the top of the
Hello_Fl.mcp
project
window, select the software target "
rom
".
•
The project window should look as follows:
•
Perform the build process by clicking the
Make
icon or
select
Project / Make
from the IDE pull-down menu or use the
<F7> function key.
32
© PHYTEC Meßtechnik GmbH 2009 L-647e_2
