Phytec phyCORE-MPC565, Быстрый старт

Страница: 27 / 60

Getting Started
•
Click OK again to advance to the next window (COM1 Properties).
Then set the following COM parameters: Bits per second = 9600 ;
Data bits = 8 ; Parity = None ; Stop Bits = 1 ; Flow Control = None .
Not shown: Start Bits = 1 .
•
Selecting OK advances you to the COM Direct – HyperTerminal
monitoring window. Notice the connection status report in the
bottom lower corner of the window.
© PHYTEC Meßtechnik GmbH 2009 L-647e_2
23