phyCORE-MPC565 QuickStart Instructions
Notice that the red check marks in front of the individual file groups in
the project window have disappeared showing the project is up to date
and all necessary output files have been created.
Hint:
If an error message should appear "Cannot open file" go into the
EPPC Debugger Settings and make sure the file
"
phyCORE-MPC565_init.cfg
" is entered. Click on
Apply
and
OK
to
save the setting. Also make sure that the source files don't have "read-
only" attributes.
•
Start the download process by clicking on green debug
arrow in the upper right section of the project window. You can
also perform the download by pressing the <F5> function key or
selecting the
Project / Run
item in the main menu bar.
•
The following status window will appear during the download.
•
Once download is complete, you will advance to a more detailed
project window that displays the source code in its lower panel.
28
© PHYTEC Meßtechnik GmbH 2009 L-647e_2
