Phytec Linux-Kit phyCARD-M, Быстрый старт

Страница: 99 / 110

phyCARD-M Installing Linux on the phyCARD-M
© 2010 PHYTEC Messtechnik GmbH L-746e_1
95
Chapter 6 Installing Linux on the phyCARD-M
This part provides instructions on how to install the boot loader ( Barebox )
on the phyCARD-M and how to write a kernel and/or a root file system
image into the target’s flash memory.
6.1 Installing the Boot Loader
The boot loader used on the phyCARD-M is Barebox . The installation of
the boot loader will be performed by the AdvancedToolKit provided by
Freescale. The AdvancedToolKit must be executed on a PC running
Microsoft Windows.
•
Insert your PHYTEC Linux-phyCARD-M-Disc, navigate to the
PHYTEC\PCA101 phyCARD-M\Linux-Kit\Software\Tools\ ADS_Toolkit
directory, and execute Setup.exe to install the AdvancedToolKit.
•
There are three additional files in the PHYTEC\PCA101 phyCARD-
M\Linux-Kit\Software\Tools\ADS_Toolkit directory: One ending with
.cfg , the second ending with . bin and the other ending with .txt.
•
Copy the file ending with .cfg to the C:\Program
Files\Freescale\AdvancedToolKit-STD/Config directory on your hard
disk.
•
Copy the file ending with .bin to the C:\Program
Files\Freescale\AdvancedToolKit-STD/Image directory on your hard
disk.
•
Configure JP1 by opening PIN 1+2 to boot with UART.
•
Connect the UART1 (connector P1) to your computer.
•
Power up the baseboard.
•
Start the program AdvancedToolKit .