manualshive.com logo in svg

Phytec Linux-Kit phyCARD-M, Быстрый старт

Поделиться
Скачать
Phytec Linux-Kit phyCARD-M Скачать руководство пользователя страница 2

phyCARD-M 

Quick Start Instructions 

© 2010  PHYTEC Messtechnik GmbH     L-746e_1 

In this manual copyrighted products are not explicitly indicated. The absence of the 
trademark (

™

) and copyright (

©

) symbols does not imply that a product is not 

protected. Additionally, registered patents and trademarks are similarly not expressly 
indicated in this manual. 

The information in this document has been carefully checked and is believed to be 
entirely reliable. However, PHYTEC Messtechnik GmbH assumes no responsibility for 
any inaccuracies. PHYTEC Messtechnik GmbH neither gives any guarantee nor accepts 
any liability whatsoever for consequential damages resulting from the use of this 
manual or its associated product. PHYTEC Messtechnik GmbH reserves the right to 
alter the information contained herein without prior notification and accepts no 
responsibility for any damages that might result. 

Additionally, PHYTEC Messtechnik GmbH offers no guarantee nor accepts any 
liability for damages arising from the improper usage or improper installation of the 
hardware or software. PHYTEC Messtechnik GmbH further reserves the right to alter 
the layout and/or design of the hardware without prior notification and accepts no 
liability for doing so. 

©

 Copyright 2010 PHYTEC Messtechnik GmbH, D-55129 Mainz. 

Rights - including those of translation, reprint, broadcast, photomechanical or similar 
reproduction and storage or processing in computer systems, in whole or in part - are 
reserved. No reproduction may be made without the explicit written consent from 
PHYTEC Messtechnik GmbH. 

 

E

U R O P E

 

N

O R T H  

A

M E R I C A

 

Address: 

PHYTEC Technologie Holding AG
Robert-Koch-Str. 39 
55129 Mainz 
GERMANY 

PHYTEC America LLC 
203 Parfitt Way SW, Suite G100 
Bainbridge Island, WA 98110 
USA 

Ordering 
Information: 

+49 (800) 0749832 

[email protected]

 

1 (800) 278-9913 

[email protected]

 

Technical 
Support: 

+49 (6131) 9221-31 

[email protected]

 

1 (800) 278-9913 

[email protected]

 

Fax: 

+49 (6131) 9221-33 

1 (206) 780-9135 

Web Site: 

http://www.phytec.de 

http://www.phytec.com

 

1st Edition: July 2010

Содержание Linux-Kit phyCARD-M















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды